# Add EthereumPoW (ETHW)

Only two steps are required to use the ETHW chain

1. First, you need to add the ETHW network to the corresponding (plug-in, mobile) client (such as TokenPocket)
2. Then use the KeyPal hardware wallet Bluetooth to connect the corresponding (plug-in, mobile) client, and add the corresponding new network wallet in batches

The tutorial is as follows:

&#x20;Client example:

### Create an ETHW Mainnet in TokenPocket

1、Open TokenPocket, click Add Wallet in the top right corner, and click Add Custom Network at the bottom of the \[Select Network] screen.

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/dntAUfJ2DqOENE5lfmDc/%E5%9B%BE%E7%89%87.png" alt=""><figcaption></figcaption></figure>

2、Open the custom network interface, click “Easy Entry” in the upper right corner, TokenPocket will list the popular public chains, and you can easily search for the public chains you need to add through the easy entry.

Fill in the ETHW abbreviation in the search bar, and you can see the search results below, click it and ready to add.

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/rW6gpfc6l8iKDoctkqTo/%E5%9B%BE%E7%89%87.png" alt=""><figcaption></figcaption></figure>

3、Double check the information and click “Save” in the lower right corner to add it successfully. Go back to the “Select Network” interface and pull down to the bottom to see the newly added EthereumPoW network.

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/RnZbDAafZAJtK5w3VT7x/%E5%9B%BE%E7%89%87.png" alt=""><figcaption></figcaption></figure>

4、Click on the newly added chain, and you can choose “Create” or “Import” to use the ETHW wallet. Import your wallet and you can see the ETHW airdrop you received.

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/9jIY90RDvITK9zBoyZrC/%E5%9B%BE%E7%89%87.png" alt=""><figcaption></figcaption></figure>

5、After adding the ETHW public chain, you can use the wallet address holding ETH to synchronize, open TokenPocket, click 【Details】, select 【Wallet Synchronization】, select ETHW public chain synchronization and switch to ETHW wallet.

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/MWkiHOaFoqzeDAheBnBU/%E5%9B%BE%E7%89%87.png" alt=""><figcaption></figcaption></figure>

KeyPal Hardware Wallet Operation&#x20;

Open the KeyPal hardware wallet and make a bluetooth connection through the client.

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/cRHB2Sv0gW9mP5XAMZJl/%E5%9B%BE%E7%89%87.png" alt=""><figcaption></figcaption></figure>

After the connection is successful, add the ETHW hardware wallet address to the client.

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/EZK0BGEqHnh5EBdkSvhS/%E5%9B%BE%E7%89%87.png" alt="" width="563"><figcaption></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/VKafggIi43De3eRpDPwS/blobs/r6x582ZI5IaUYyz3bnGE/%E5%9B%BE%E7%89%87.png" alt="" width="563"><figcaption></figcaption></figure>

Check ETHW and add, and you're done.
